DeStill

Application

In electronics and semiconductor industry, there is a wide range of applications for ultra pure water e. g. for cleaning, rinsing and etching. The multi effect distillation system DeStill produces sterile, pyrogen-free pure water with the option of combined pure steam generation.

Description

The distillation system consists of a series of interconnected columns and works according to a multistage principle. Pre-treated feed water enters into the first column that contains a double tube heat exchanger. Using external energy the feed water evaporates in the heat exchanger. In order to separate any water droplets that might harbour contaminants like salts and endotoxins, the column has an expansion chamber with demistor. The tubes of the heat exchanger are connected with the expansion chamber. While the steam moves further upwards in the chamber, unevaporated water droplets fall back into the lower section of the column by gravity and due to the specific column design with demsitor. In this way they are separated from the steam. The non-evaporated water enters the next column where it is heated again in a heat exchanger. For heating steam from the previous stage is used. While another portion of the water evaporates, some of the steam condenses into ultra pure water. This process is repeated in each column. The more columns, the more energy-efficient the system. In the last stage the steam is condensed in a double tube heat exchanger and cooled to 85 to 95 °C. The concentrated contaminants are directed to drain by a time controlled blow-down valve. As an important quality characteristic, the conductivity of the pure water is continuously monitored. If required, the distillation system can be designed for combined generation of pure water and pure steam at the same time.

  • Generation of sterile, pyrogen-free WFI
  • Combined WFI and pure steam generation possible
  • WFI storage and distribution on demand
  • Customized modular design with a standard PLC
  • Skid mounted for easy installation and start-up
  • According to applicable guidelines (e. g. cGMP, FDA, GAMP, ISPE)
  • Completely qualified (DQ, IQ, OQ) if desired

Typical Technical Data

Capacity0,1 - 20 m3/h
Number of Columns4 - 6 (max. 8)
Ultra Pure Water Temperature80 - 95 °C (lower on request)
Bacteria< 10 CFU/100ml
Endotoxins< 0,25 EU/ml
Materialaccording to requirements (1.4404, 1.4435/AISI 316L, …)
Heating Mediumsteam, electric heating
Cooling Mediumglycol, ice water, brine
Optionsdifferent automation levels; remote maintenance access; water pre-treatment; combined pure steam generation; WFI storage and distribution (loop)

Contact

Tel.: +91 22 2783 3655
Fax: +91 22 2783 4814
mail@centecrrr.com

Downloads

DeStill - Datasheet / Datenblatt
(0,50 MB, PDF, EN/DE)